This is an offshoot from the Seawall and Wateroads pack using the Marina texture to add a smaller (15M) road as many people commented that the expressway road used in the pack was too large. There are no issues with holes at intersections using this road.
To clear up any potential confusion , these Esplanade Roads are in addition to the recent Seawall and WaterRoads Pack. Although they use the same textures, they are distinct mods and can work together. You do not need to remove the old pack to use these new roads.
I made all the 13 required pieces myself but copied the format of the files from Altiris's unpublished 15M Esplanade Road , so most of the credit for solving the "holes at Intersections " problem should rightly go to him. Published with prior agreement with Altiris.
Menu: Same as Altiris' Esplanade Road
You need to select:
1/ Individual placement (top of UIM menu)
2/ Custom content (3rd from bottom UIM menu)
3/ Then roads
IMPORTANT: This mod requires you to add a couple of custom tags to the game files. This is normally done by the UIM update and will not be necessary once it is upgraded to include these tags. IF YOU DO NOT DO THIS YOUR GAME WILL CRASH ON STARTUP.
NB If you already have the previous Seawalls & Water Roads Pack installed you DO NOT need to install the tags again as they are the same as for that mod.
First , make sure you have the latest UIM (V1.79.9) installed , the link has been added to the additional resources box listed below.
Download the tags.cfg file https://www.dropbox.com/s/pduqwpa0azv4sb8/tags.cfg?dl=0 and place in your :
C:\Program Files (x86)\Steam\SteamApps\common\Cities XL 2012\Data\Config\
folder and allow it to overwrite your existing version. This file is taken from the latest UIM V1.79.9 with my custom tags added to it.
OR if you prefer and ONLY if you are confident editing game files
open your existing local tags.cfg file located at C:\Program Files (x86)\Steam\SteamApps\common\Cities XL 2012\Data\Config\
in Notepad or similar and add the following custom tags to the "style " subsection:
<StylePJCSW1/> <!-- PJC Custom Seawall -->
<StylePJCSW2/> <!-- PJC Custom Seawall -->
WARNING : Manual changes to this file should be undertaken very carefully , always make a backup before attempting to edit this file..
Place the road as you would any other. It will handle corners , angles and intersections without any gaps. PLace the basic road first , then highlight a section , then use the upgrade panel to add a set of marina slips. Upgrade again to remove the slips.
Highlight a section:
Use the upgrade button to add boat slips to a highlighted section:
- Installation Pre-requiste(s):
- User Interface Mod by ALtitris V1.79 or higher
Updated Tags File
It's not long before we will be moving. The new hosting has been setup and the next thing to be done is to change the DNS. When it's changed it may take between 24 to 48 hours to take effect. During this time XLN will be closed so it can be backed up. When the new DNS takes effect, you will see a basic page with a message regarding the move. Note: It may take up to two weeks to get XLN up and running again.Dismiss Notice
Transportation 15M Esplanade Road with Marina 0ption V1.1
New 15M Esplande Road with no holes at interesections upgradeable with a Marina Option