This is my fourth and final spin off from the recent Seawall and WaterRoads pack , again based upon Altiris's excellent Espanade Road. This is the rounded concrete wall texture , with the holes at intersections problem fixed. I imagined this would be suitable for industrial/port type waterfront locations.
I made all the 13 required pieces myself but copied the format of the files from Altiris's unpublished 15M Esplanade Road , so most of the credit for solving the "holes at Intersections " problem should rightly go to him. Published with prior agreement with Altiris.
Menu: Same as Altiris' Esplanade Road
You need to select:
1/ Individual placement (top of UIM menu)
2/ Custom content (3rd from bottom UIM menu)
3/ Then roads
IMPORTANT: This mod requires you to add a couple of custom tags to the game files. This is normally done by the UIM update and will not be necessary once it is upgraded to include these tags. IF YOU DO NOT DO THIS YOUR GAME WILL CRASH ON STARTUP.
NB If you already have the previous Seawalls & Water Roads Pack installed you DO NOT need to install the tags again as they are the same as for that mod.
First , make sure you have the latest UIM (V1.79.9) installed , the link has been added to the additional resources box listed below.
Download the tags.cfg file https://www.dropbox.com/s/pduqwpa0azv4sb8/tags.cfg?dl=0 and place in your :
C:\Program Files (x86)\Steam\SteamApps\common\Cities XL 2012\Data\Config\
folder and allow it to overwrite your existing version. This file is taken from the latest UIM V1.79.9 with my custom tags added to it.
OR if you prefer and ONLY if you are confident editing game files
open your existing local tags.cfg file located at C:\Program Files (x86)\Steam\SteamApps\common\Cities XL 2012\Data\Config\
in Notepad or similar and add the following custom tags to the "style " subsection:
<StylePJCSW5/> <!-- PJC Custom Seawall -->
WARNING : Manual changes to this file should be undertaken very carefully , always make a backup before attempting to edit this file..
Place the road as you would any other. It will handle corners , angles and intersections without any gaps.
The default placement height has been set at 14M so that the base shows justr above the waterline. Use the shift key when placing to lower the wall and hide the base if you prefer.
Installation: After making sure you have the necessary custom tag installed as per the instructions above, place the patch file in your mods folder.
- Installation Pre-requiste(s):
- User Interface Mod (UIM) V1.79.9 or higher
Updated tags file
Transportation 15m Rounded Concrete Esplanade Road V1.1
15M Rounded Concrete Esplanade Road